|
Note: RMRE brackets & custom oil pan provide
more clearance allowing installation of a dry sump
system between a dragster's narrow frame rails!
|
Put the results of
Reher-Morrison's constant R&D into your engine bay!
The Super Series 665 creates
the next level of Big Block Chevy performance! If
you are looking to take the next step in Big Block Chevy
performance for your car, then the Reher-Morrison Super
Series 665 is the engine for you!
This 4.600" bore, 5.000" stroke engine uses
the RMRE 12º Raptor cylinder heads to take the
performance of the Big Block Chevy to the next level.
It is track tested and Dyno proven to give consistent,
reliable 1,350 HP and 1,015 Ft./lbs.
Torque round after round.
|
|
12º Raptor 665ci Components
Include:
|
|
•
Brodix 10.700" Raised Cam Aluminum Block |
•
Callies 4340 5.00" Magnum Crankshaft, Internally
Balanced |
|
•
Reher-Morrison/Gary Williams 1250 cfm Dominator Carburetor |
•
Reher-Morrison Custom Forged Pistons |
|
•
RMRE Custom Sheetmetal Intake Manifold |
•
Reher-Morrison Custom .043, .043, 3/16 Ring Set |
|
•
RMRE Reversion Plates |
•
Diamond 1.031" S.W. Tool Steel Wrist Pins |
|
•
Reher-Morrison Fabricated Aluminum Billet Rail Valve Covers |
•
MPG 6000 Series Aluminum Rods/1.031" P/E |
|
•
RMRE 12º Raptor Cylinder Heads with Special Alloy Seats |
•
Clevite 'H' or 'V' Series Rod & Main
Bearings |
|
•
Manley Custom Titanium Valves (2.450" Int. &
1.850" Exh.) |
•
Reher-Morrison/Moroso Custom Hi-Vol/Press Oil Pump &
Pickup |
|
•
Manley NexTek Triple Valve Springs On The Int. & Comp Cams Triple Pacaloy
On The Exh. |
•
Reher-Morrison/Moroso Custom Dry Sump Oil Pan |
|
•
Manley 10° Titanium Retainers |
•
Jesel Belt Drive System |
|
•
Shaft Mounted Rocker Arms (1.85 Int, 1.80 Exh) with
Special Offsets |
•
MSD Crank Trigger Distributor |
|
•
Clark
Copper Head Gaskets |
•
Mallory Crank Trigger Ignition System |
|
•
Reher-Morrison Custom 7/16" Pushrods |
•
Reher-Morrison/Moroso Spiral Core Plug Wires |
|
•
.903" Diameter/HIPPO Roller Lifters |
•
ATI Super Damper - SFI Approved |
|
•
RMRE Custom Ground 55mm Roller Camshaft |
•
ARP 12 Point Head Stud Kit |
|
•
RMRE/Moroso
Vacuum Pump Kit |
|
