The All New
N2O Series 622
1600+ Horsepower
1250 Ft./Lbs.

$37,495 Delivered!

  Introducing the new "N2O Series" of engines from Reher-Morrison Racing Engines.  We have built-in the same high quality you have come to expect from Reher-Morrison, yet we also beefed-up the components in order to maintain the reliability of these higher horsepower powerplants.

The RMRE N2O Series 622 engine makes well over 1200+ Horsepower off the bottle. While capable of 1800+ Horsepower on nitrous, we have tuned the setup back to improve the longevity.

These "N2O Series" are built to handle the rigors of running nitrous oxide.  You will notice things like custom pistons, piston rings, wrist pins, lifters and connecting rods all made especially for use with nitrous.  A partial list of components follows.  For more details, call our Parts Department.

N2O Series 622 w/o N2O

Click to Zoom
N2O Series 622

Click to Zoom

New "Qualifying Bullets" for
 Top Sportsman & Top Dragster

"Let us build one for you!"

RMRE N2O Series 622 Components Include:

• Gary Williams 2x4 Matched Set 1150 cfm Dominator Carburetors • Diamond 1.031" Dia. .200" Straight Wall Tool Steel Wrist Pins
• Pro-Filer 2x4 Oval Port Intake Manifold • MGP N2O Series Aluminum Connecting Rods
• RMRE 1/2"-4 Hole 2.050" 4500 Reversion Plates • Callies 4340 4.625" Pro Magnum Crankshaft - Int. Balanced
• Reher-Morrison Fabricated Aluminum Billet Rail Valve Covers • Clevite 'H' or 'V' Series Rod & Main Bearings
• Reher-Morrison Oval/Spreadport Aluminum Cylinder Heads • Jesel Belt Drive Timing System
• Manley Custom Titanium Valves (2.450" Int & 1.850" Exh) • Mallory Crank Trigger Ignition System
• Comp Cams 1.650" Triple Pacaloy Valve Springs • MSD Billet Distributor
• Manley 10° Titanium Retainers • Reher-Morrison/Moroso Spiral Core Plug Wires
• Shaft Mounted Rocker Arms (1.85 Int, 1.80 Exh) with Improved  Offset • Reher-Morrison/Moroso Custom Dry Sump Oil Pan
• Crower Severe Duty .903" Dia. Lifters w/.812" Rollers • Reher-Morrison Spec 5 Stage Dry Sump Oil System
• Reher-Morrison Custom 7/4 F/O Swap Camshaft • ATI Super Damper - SFI Approved
• Reher-Morrison Custom 7/16" Pushrods • ARP 12 Point Head Stud Kit
• RMRE N2O Pistons w/Gas Ports •  RMRE N2O Fogger System
• RMRE N2O .043, .043, 3/16 Piston Ring Set • Bronze Lifter Bore Sleeves for Improved Reliability
*Prices on complete engines include:
FREE Steel Engine Cradle ! (reg. $55.00)
FREE Reusable Shipping Container ! (reg $140.00)
FREE Air Freight and Insurance ! (to most destinations in the continental U.S.)
FREE Engine Care Kit ! ($170.00 value)

© Reher-Morrison Racing Engines, 2004
web@rehermorrison.com