|
New! Now you can put a
Reher-Morrison Big Chief style engine into your engine
bay for under $18,500! Our R&D department has
developed an economically priced Big Chief engine
for the budget minded racer, while maintaining the
quality you have come to expect from Reher-Morrison.
We have also maintained the power and
consistency a bracket racer needs to compete round after
round. This is one stout engine. Check out the torque
curve in the graph below. This baby's got a torque
curve that's flat as a pancake!
This 4.600" bore, 4.250"
stroke power plant uses the new DART 18º Big Chief Pro
1 cylinder heads to produce 1,000 Hp and 800 Ft/Lbs.
of
stump pulling torque! If you have been waiting for a
inexpensive Reher-Morrison Big Chief style engine, your
wait is over.
|
|
Super Series 565 Components
Include:
|
|
•
Dart Big 'M' Block |
•
4340 Forged Steel 4.250" Crankshaft |
|
•
Reher-Morrison/Gary Williams 1150 cfm Dominator Carburetor |
•
Reher-Morrison Custom 14+:1 Forged Pistons |
|
•
DART - Big Chief Single Plane Intake Manifold |
•
Reher-Morrison Custom .043, .043, 3/16 Ring Set |
|
•
DART - Phenolic Carb Spacer - 1" |
•
Reher-Morrison Custom Taper Wall Tool Steel Wrist Pins |
|
•
Reher-Morrison Fabricated Aluminum Billet Rail Valve Covers |
•
Reher-Morrison/Manley 4340 H-Beam Rods w/ARP 2000 Bolts |
|
•
DART 18° Big Chief Pro 1 Aluminum Heads |
•
Childs & Albert / Clevite 'H' Series Rod & Main
Bearings |
|
•
Manley 2.400" Titanium Intake Valves &
1.880" stainless steel Exhaust Valves |
•
Reher-Morrison/Moroso Custom Hi-Volume/Hi-Press Oil Pump &
Pickup |
|
•
Manley 1.640" NexTek Double Roller Valve Springs |
•
Reher-Morrison/Moroso Custom Drag Race Oil Pan |
|
•
Manley 10° Titanium Retainers |
•
Manley Double Roller Timing Chain Set |
|
•
Jesel Shaft Mounted Rocker Arms (1.75 Intake &
1.70 Exhaust) |
•
Mallory Comp 9000 Billet Distributor |
|
•
Fel-Pro Blue Stripe Perma-Torque Head Gaskets |
•
Reher-Morrison/Moroso Spiral Core Plug Wires |
|
•
Reher-Morrison Custom Chromemoly Pushrods |
•
ATI Super Damper - SFI Approved |
|
•
Crower Cutaway Severe-Duty Roller Lifters |
•
ARP 12 Point Head Stud Kit |
|
•
Reher-Morrison Custom Ground 7/4 FO Swap Roller Camshaft |
|
