rmre start

In Stock and Ready to Ship!
"The Super Series 502 is not your ordinary 502!"
- 4.470" Bore / 4.000" Stroke - - 800Hp / 670 Ft.Lbs. -	$11,995.00 Delivered!
	Click to Zoom
Reher-Morrison has taken it's on-track success and put it into an affordable racing engine package. This is not an off-the-shelf put together engine, this is an engine that is designed for the track and uses many custom Reher-Morrison components. Just like all the Super Series engines, this engine benefits from Reher-Morrison's continuing Research and Development. This engine is track proven and Dyno tested to produce 800 HP and 670 Ft./Lbs. of Torque. Power, reliability and consistency, reasons why you need to make Reher-Morrison *"Your* Engine & Parts Department!"**

	• Block - GM Gen. VI H.O. Marine Block
	• Carburetor - Gary Williams Holley 1050 cfm Dominator
	• Intake Manifold - Edelbrock intake manifold used exclusively on this engine
	• Spacer - Moroso 1" Aluminum intake manifold spacer
	• Valve Covers - Reher-Morrison Die Cast Aluminum Valve Covers
	• Cylinder Heads - Reher-Morrison spec Brodix BB-2+ aluminum heads, one piece Stainless Steel severe duty valves, 2.250" intake and 1.880" exhaust, 1.625" OD Vasco Jet double roller valve springs, 10° Heat-treated valve locks, 7/16" screw-in rocker studs. Ports blended, Ports matched and valve job
	• Guide Plates - Comp Cams 3/8" pushrod guide plates
	• Retainers - Reher-Morrison custom 10° Titanium retainers
	• Stabilizers - Reher-Morrison custom CNC machined valvetrain stabilizers
	• Head Studs - ARP stud kit w/12 point nuts & parallel ground washers
	• Rockers Arms - Harland Sharp 1.70 ratio aluminum roller rocker arms
	• Head Gaskets - Fel-Pro Blue Stripe Perma-Torque head gaskets
	• Pushrods - Reher-Morrison Custom 3/8" dia. x .083" wall seamless chromemoly pushrods
	• Lifters - Crower Cutaway severe-duty roller lifters
	• Camshaft - Reher-Morrison custom ground steel billet roller camshaft
	• Crankshaft - Scat 4.000" stroke 4130 Forged steel crankshaft
	• Pistons - Reher-Morrison custom lightweight 14:1 forged aluminum pistons
	• Piston Rings - Reher-Morrison custom file fit Plasma Moly piston ring set
	• Connecting Rods - Manley +.25" Lg. forged steel H-beam connecting rods with ARP 8740 rod bolts
	• Bearings - Childs & Albert main and rod bearings
	• Timing Set - Crane double roller timing set w/Torrington bearing
	• Oil Pan - Reher-Morrison/Moroso Custom Drag Race oil pan
	• Oil Pump - Reher-Morrison/Moroso Custom hi-volume/hi-pressure oil pump with brazed pickup
	• Ignition - Mallory Comp 9000 Billet ignition system
	• Sparkplug Wires - Reher-Morrison/Moroso 8mm plug wires
	• Sparkplugs - NGK V-Power series spark plugs
	• Balancer/Damper - ATI Super damper - SFI approved
	• Head Studs - ARP 12 point head stud kit