|
Reher-Morrison's Super Series 412 is sure to please
the Small Block Chevrolet fans! If you don't want to
or can't run a Big Block, but still want consistency and
reliability, this engine is for you!
At 4.185" bore and 3.750" stroke, this dyno tuned
and tested engine produces 675 HP and 575 ft./lbs. of
torque. That's enough horsepower to weight ratio
to push a 1650 lb. dragster 8.0's and 163 mph.
With features like the Dart Little "M"
cylinder block and Dart 230cc Pro 1 aluminum cylinder
heads CNC ported by Reher-Morrison, this engine will provide
winning service for hundreds of passes!!
|
|
Super Series 412 Components
Include:
|
|
•
Dart Little 'M' Block |
•
4340 Forged Steel 3.750" Stroke Crankshaft |
|
•
Holley 950 cfm Carburetor |
•
4340 Forged I-Beam Rods with 7/16" Rod Bolts |
|
•
Dart - SB4 Aluminum Intake Manifold |
•
Total Seal .043, .043, 3mm Ring Set |
|
•
Moroso - Aluminum Carb Spacer - 1" |
•
Mallory Magnetic Pickup Billet Distributor |
|
•
Reher-Morrison Cast Alum. Logo Valve Covers |
•
Reher-Morrison Custom 14:1 Forged Aluminum Pistons |
|
•
Dart - 230cc Pro 1 Aluminum Cylinder Heads CNC
ported by
Reher-Morrison |
•
Childs & Albert / Clevite 'H' Series Rod & Main
Bearings |
|
•
Stainless Steel Valves (2.080" Int &
1.625" Exh) |
•
Moroso Hi-Vol/Press Oil Pump & Welded Pickup |
|
•
Comp Cams Pacaloy Double Roller Valve Springs |
•
Moroso 8-1/4" Deep 7 Quart Pan |
|
•
Comp Cams 10° Titanium Retainers |
•
Manley Double Roller Timing Set w/Torrington Bearing |
|
•
Harland Sharp Aluminum Rocker Arms (1.6/1.6) |
•
ATI Super Damper - SFI Approved |
|
•
Moroso Valvetrain Stabilizer |
•
Reher-Morrison/Moroso Spiral Core Spark Plug Wires |
|
•
Fel-Pro Blue Stripe Perma-Torque Head Gaskets |
•
Edelbrock Polished Aluminum Timing Cover |
|
•
Reher-Morrison Custom Chromemoly Pushrods |
•
ARP 12 Point Head Stud Kit |
|
•
Crower Roller Lifters |
•
Reher-Morrison Custom Taper Wall Tool Steel Wrist Pins |
|
•
Reher-Morrison Custom Ground Roller Camshaft |
|
