Oiling Systems and Vacuum Pump Combos

  • Gain up to 25 Hp over a wetsump system by reducing windage - even more with low-tension rings and higher crankcase vacuum.
  • Increase engine reliability with a continuous supply of oil to the bearings.
  • Improve engine cooling and consistency by maintaining even oil temperature.
  • Enhance safety by minimizing oil volume inside the engine.

Reher-Morrison Dry Sump System


Protect your engine and your investment with a Reher-Morrison dry-sump oiling system. We offer complete packages with Peterson Fluid Systems pumps, mounts, oil tanks and filters. We also feature XRP braided hose and fittings.
Our dry-sump systems can improve the performance and reliability of any competition engine:

Oil Accumulator

If you are running a 4.250” stroke or larger, an engine oil accumulator is a must. The oil accumulator assists in preventing starting line and especially finish line oil starvation. The oil accumulator injects extra oil into your system only when necessary. To protect your investment, an oil accumulator is an excellant idea.

Reher-Morrison Wet Sump System

 

Reher-Morrison designed this wet sump system to maintain consistent oil pressure from the burnout to the turnout! 

You won’t see your oil pressure fluctuate with this track tested system for your Big Block Chevrolet.
Moroso builds the oil pan to our specifications with special baffling. 

The Reher-Morrison Wet Sump System includes:

  • Reher-Morrison/Moroso Oil pan with oil pan gasket
  • Reher-Morrison/Moroso high-volume, high-pressure oil pump with brazed oil pump pickup
  • Moroso oil pump driveshaft with steel coupler
  • Solid windage tray with mounting studs and nuts

Reher-Morrison Vacuum Pump Kit

Reher-Morrison is the originator of the Vacuum Pump Kit. This kit is designed to take the hassle out of installing a vacuum pump. The complete Vacuum Pump Kit will save you time and money.
The Reher-Morrison Vacuum Pump Kit includes:
  • Moroso Three-Vane Vacuum Pump
  • Mandrel, Pump and Crank Pulleys
  • Breather/Catch Tank with Separate Mounting Bracket
  • -10 and -12 AN Fittings
  • -12 Braided Stainless Hose

Call for a complete system or components!

Make Reher-Morrison "Your Engine & Parts Department"

© Reher-Morrison Racing Engines, 2003
web@rehermorrison.com